Pre-martensitic phenomena in Ti40.7Hf9.5Ni44.8Cu5 shape memory alloy

Pre-martensitic phenomena such as abnormal resistivity growth, diffusion scattering, “tweed” contrast and internal friction peak were observed in Ti_40.7Hf_9.5Ni_44.8Cu₅ alloy prior to the forward martensitic transformation on cooling. It was shown that all the observed phenomena were due to the formation of quasi-static strain nanodomains in the B2 phase prior to the forward martensitic transformation. This led to accumulation of the elastic energy before the phase transition and resulted in the variation in thermodynamic balance for the forward martensitic transformation and, as a result, influenced the parameters of the phase transition. The appearance of elastic energy prior to the forward transformation caused a decrease in the forward and reverse martensitic transformations' start temperatures, a widening of the temperature range of the reverse transformation and an increase in the hysteresis of the transformation.     

继电保护中多路模拟量采集系统的设计

介绍了一种基于高性能浮点DSP芯片TMS320C32、CPLD芯片XC95288和A/D采样芯片AD976组成的多路采集系统的工作原理以及设计方法。通过对第一路施加特殊的电压量,在CCS开发环境下读取采样缓冲区的值,并利用Matlab对采样数据进行了全波傅氏变换。此外,该系统已在继电保护中得到广泛应用,实践表明,该系统能较好地解决多路模拟量的采集,并确保了采样数据的安全可靠性。     

Producing fully-lamellar microstructure for wrought beta-gamma TiAl alloys without single α-phase field

Fine-grained fully-lamellar (FL) microstructure is desired for TiAl components to serve as compressor/turbine blades and turbocharger turbine wheels. This study deals with the process and phase transformation to produce FL microstructure for Mo stabilized beta-gamma TiAl alloys without single α-phase field. Unlike the α + γ two-phased TiAl or beta-gamma TiAl with single α-phase field, the wrought multi-phase TiAl–4/6Nb–2Mo–B/Y alloys exhibit special annealing process to obtain FL microstructure. Short-term annealing at temperatures slightly above β-transus is recommended to produce the desired FL microstructure. The related mechanism is to guarantee the sufficient diffusion homogenization of β stabilizers during single β-phase annealing, and further avoid α decomposition by α → γ + β when cooling through α + β + γ phase field. The colony boundary β phase contributes to fine-grained nearly FL microstructure, by retarding the coarsening of the α phase grains.     

Design guidelines for titania-silica-alumina ceramics with tuned anatase to rutile transformation

Titania-based ceramics with adjustable anatase-rutile fractions were obtained by milling of anatase, quartz and corundum precursors, uniaxial pressing and firing at 1100?°C. The influence of silica and alumina, combined with milling time and compaction pressure, was studied by design of experiments. The L9 orthogonal array with a three-level noise factor was employed. Firing of pure titania at 1100?°C yielded complete anatase to rutile transformation (ART), whereas stabilized samples show that an optimum amount of 9% silica and 33% alumina reduces phase transformation to only about 5?wt% rutile. An extended correlation matrix combined with analysis of variance (ANOVA) was applied to assess the combined effects of quartz, alumina, milling time and uniaxial compressing pressure on relative density, and anatase to rutile transformation. Results show absence of ART after milling, and controlled partial conversion of anatase to rutile after firing. Very good fitting was obtained by multivariate analysis on considering first and second order terms for dependence on silica contents and interactions between silica and each of the remaining factors, including milling time. This empirical dependence could be interpreted on a sound physicochemical basis, allowing the prediction of suitable compositions and processing conditions to obtain rutile-free samples by conventional ceramic processing, and to design ceramic samples with controlled fractions of anatase and rutile.     

污水处理场4M10-34/78-76型往复式空气压缩机改造

无油润滑是现代成熟的压缩机润滑技术,它节省了能源,简化了工艺流程,提高生产效率,本次4M10-34/78-76型往复式空气压缩机少油润滑改为无油润滑着力于降低设备故障频率,延长设备使用时间,降低检修所产生的费用,降低生产停工产生的损失。     

基于数字化、共享化背景下财务管理模式创新研究与实践

介绍了山东能源集团财务管理数字化转型的背景,阐述了该集团新型数字化、共享化财务管理模式的建设路径。通过不断探索财务理念和管理实践的创新,以及新型数字化和财务共享管理模式的建设,该集团实现了财务管理模式的转型升级,助力企业实现数字化、智慧化转型。     

航空装备维修保障模式数字化转型

针对航空装备维修保障未来发展需求，通过分析维修保障模式转型的外部需求、内在特点和技术支撑条件，提出了转型的必要性和前景，认为航空维修保障模式下一步转型的方向是全面数字化。数字化转型的本质是全行业、全业务数字化，其基础是全要素数字化，关键是全要素互联，核心是现实世界与数字镜像构建的信息物理系统。必须建立系统科学的观点，依托数字技术手段并通过信息网络的互联和智能科学的支撑方能实现。此外，还提出了相应的研究方向和课题。     

基于小波时频图和卷积神经网络的断路器故障诊断分析

高压断路器操动机构振动信号为非平稳性信号,蕴含着丰富的操动机构工作状态的信息,对操动机构工作状态的检验辨识具有重大意义。提出一种基于小波时频图和卷积神经网络的断路器故障诊断方法。对操动机构振动信号进行连续小波变换生成时频图(CWT),并对时频图进行统一压缩预处理;将预处理后的时频图作为特征图输入卷积神经网络AlexNet模型;通过对网络参数的调整,逐步改进网络模型,有监督地实现对操动机构故障状态的辨识诊断。结果表明,该方法能够有效地运用于断路器操动机构故障辨识诊断,与小波频带能量-RBF、小波频带能量-SVM的故障识别相比,故障识别准确率最高。     

基于优化遗传算法改进的小波网络预测锰系磷化膜的耐蚀性

针对小波网络训练速率较慢、结构不易确定等问题,结合实验选取的因素(包括输入参数和输出结果),通过仿真确定了小波网络的结构为3-7-1。接着,利用优化遗传算法对小波网络进行改进,修正其初始权值和因子。通过仿真证实了改进的小波网络具备更强的寻优能力和更快的收敛速率。最后,利用改进的小波网络预测锰系磷化膜的耐蚀性。结果表明:改进的小波网络可以更好地拟合样本数据,能够进行较准确的预测。